Table of Contents
Advertisement
8.3 #B36-500 Log Set Installation
CAUTION: Do not place logs directly over burner port holes. Improper
log placement may affect flame appearance and cause excessive soot
to build upon the logs and glass.
•
If converting to propane, complete the conversion before
installing the log set. Follow the conversion instructions included
with the kit.
•
Log numbers are located on the bottom of each log. Refer to the
following instructions and illustrations for proper log placement.
1.
Position the ember panel in front of the burner.
Figure 8.2, Base Logs
Figure 8.3, Installed Log Set
#BAY-36-LE & MV R.11 April 2021
2.
Align the holes in the bottom of base logs (B36-1 to B36-4) with
the mounting pins on the burner. Push logs down onto pins to
seat.
3.
Align logs B36-5 and B36-6 with the notches on base logs.
4.
Align log B36-7 with the bracket on the burner and the notch on
ember panel.
5.
Distribute rockwool embers onto the logs and burner using a
stiff bristle brush.
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
FIREPLACE SETUP 45
Advertisement
Table of Contents
