Table of Contents
Advertisement
8.4 #B41-500 Log Set Installation
CAUTION: Do not place logs directly over burner port holes. Improper
log placement may affect flame appearance and cause excessive soot
to build upon the logs and glass.
•
If converting to propane, complete the conversion before
installing the log set. Follow the conversion instructions included
with the kit.
•
Log numbers are located on the bottom of each log. Refer to the
following instructions and illustrations for proper log placement.
1.
Position the ember panel in front of the burner.
Figure 8.2, Base Logs
Figure 8.3, Installed Log Set
#BAY-41-L & BW R.14 July 2019
2.
Align the holes in bottom of base logs (BP1 to BP4) with the
mounting pins on the burner. Push logs down onto pins to seat.
3.
Align logs BP5 and BP6 with the notches on the base logs.
4.
Align logs BP7 and BP8 as shown in Figure 8.3.
5.
Distribute rockwool embers onto the logs and burner using a
stiff bristle brush.
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
FIREPLACE SETUP 41
Advertisement
Table of Contents
