9.3 #CK29-500 Log Set Installation
CAUTION: Do not place logs directly over burner port holes. Improper
log placement may affect flame appearance and may cause excessive
soot to build upon the glass.
•
If converting to propane, complete the conversion before
installing the log set. Follow the conversion instructions included
with the kit.
•
Log numbers located on the bottom of each log. Refer to
following instructions and illustrations for proper placement.
1.
Position the ember panel in front of the burner as shown.
2.
Align the holes in base logs CK29-1, CK29-2, CK29-3, and CK29-4
with the corresponding mounting pins on the burner. Push the
Figure 9.2, Installation of CK29-500
28 GAS FIREPLACE INSERT SETUP
logs down onto pins to seat.
3.
Align logs CK29-5 and CK29-8 with corresponding notches on
the base logs and the ember panel.
4.
Align the notches in logs CK29-6 and CK29-7 with the log grates
on the burner.
5.
Distribute rockwool embers onto logs and burner.
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
#CSK-29-L R.9 October 2019