Mantel Requirements; Glass Frame Assembly; Glass Frame Assembly Removal; Glass Frame Assembly Installation - kozy heat 56701 Installation And Operation Manual

NON-COMBUSTIBLE ZONE:
Rigid pipe: 1-1/2" (38 mm) above elbow for entire width and depth (behind header) of fireplace.
#700 series flexible venting: 1" (25 mm) above elbow for entire width and depth (behind header) of fireplace.
14"(356mm)
12"(305mm)
10" (254mm)
8" (203mm)
14"
12"
10"
356mm
305mm
8"
254mm
203mm
Figure 12a
CAUTION: TO PREVENT GLASS FRAME ASSEMBLY FROM FALLING FROM FIREPLACE AND BECOMING DAMAGED, FOLLOW THESE
INSTRUCTIONS EXACTLY WHEN REMOVING AND INSTALLING GLASS FRAME ASSEMBLY.
REMOVE GLASS FRAME ASSEMBLY
1. Locate spring-loaded handles securing glass frame assembly at top & bottom of firebox.
2. Pull bottom handles out and „down‟ to release glass frame assembly bottom.
3. Pull top handles out and „up‟ to release glass frame assembly top.
INSTALL GLASS FRAME ASSEMBLY
1. Place glass frame assembly onto fireplace front.
2. Pull top handles out and „down‟ to secure glass frame assembly top.
3. Pull bottom handles out and „up‟ to secure glass frame assembly bottom.
Pull latches „out‟ and „up‟ to release glass frame
assembly top.
Pull latches „out‟ and „down‟ to attach glass
frame assembly top.
Pull latches „out‟ and „down‟ to release glass
frame assembly bottom.
Pull latches „out‟ and „up‟ to attach glass frame
assembly bottom.
Figure 12b

MANTEL REQUIREMENTS

3
"
4
19mm
6"
152mm

GLASS FRAME ASSEMBLY

PAGE 12