Reports Specifications; Figure 205 Lan Ip Address Report Example; Table 137 Lan Ip Address Report; Table 138 Report Specifications - ZyXEL Communications ZyWall 35 User Manual

ZyWALL 35 User's Guide

Figure 205 LAN IP Address Report Example

The following table describes the labels in this screen.

Table 137 LAN IP Address Report

LABEL
IP Address
Direction
Amount

23.4.4 Reports Specifications

The following table lists detailed specifications on the reports feature.

Table 138 Report Specifications

LABEL
Number of web
sites/protocols
or ports/IP
addresses listed:
Hit count limit:
Bytes count
limit:
394
DESCRIPTION
This column lists the LAN IP addresses to and/or from which the most traffic has
been sent. The LAN IP addresses are listed in descending order with the LAN IP
address to and/or from which the most traffic was sent listed first.
This field displays Incoming to denote traffic that is coming in from the WAN to the
LAN or DMZ. This field displays Outgoing to denote traffic that is going out from the
LAN or DMZ to the WAN.
This column displays how much traffic has gone to and from the listed LAN IP
addresses. The measurement unit shown (bytes, Kbytes, Mbytes or Gbytes) varies
with the amount of traffic sent to and from the LAN IP address. The count starts over
at 0 if the total traffic sent to and from a LAN IP passes the bytes count limit
Table 138).
DESCRIPTION
20
32
Up to 2 hits can be counted per web site. The count starts over at 0 if it passes four
billion.
64
Up to 2 bytes can be counted per protocol/port or LAN IP address. The count starts
64
over at 0 if it passes 2 bytes.
(see
Chapter 23 Logs Screens