Figure 280 Menu 15.2: Nat Server Setup; Figure 281 Server Behind Nat Example - ZyXEL Communications ZyWall 35 User Manual

ZyWALL 35 User's Guide

Figure 280 Menu 15.2: NAT Server Setup

You assign the private network IP addresses. The NAT network appears as a single host on the
Internet. A is the FTP/Telnet/SMTP server.

Figure 281 Server Behind NAT Example

478
Note: The last port forwarding rule is reserved for Roadrunner
services. The rule is activated only when you set the WAN
Encapsulation to Ethernet and the Service Type to
something other than Standard.
Menu 15.2.1 - NAT Server Setup
Default Server: 0.0.0.0
Rule Act. Start Port
------------------------------------------------------
001 Yes 21
002 No 0
003 No 0
004 No 0
005 No 0
006 No 0
007 No 0
008 No 0
009 No 0
010 No 0
Select Command= None
Press ENTER to Confirm or ESC to Cancel:
End Port IP Address
25 192.168.1.33
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
0 0.0.0.0
Select Rule= N/A
Chapter 34 Network Address Translation (NAT)