Bandwidth Manager Class Configuration; Figure 163 Bandwidth Manager: Class Setup; Table 110 Bandwidth Manager: Class Setup - ZyXEL Communications ZyWall 35 User Manual

ZyWALL 35 User's Guide

Figure 163 Bandwidth Manager: Class Setup

The following table describes the labels in this screen.

Table 110 Bandwidth Manager: Class Setup

LABEL
Interface
Bandwidth
Management
Add Sub-Class
Edit
Delete
Statistics

19.9.1 Bandwidth Manager Class Configuration

Configure a bandwidth management class in the Class Setup screen. You must use the
Summary screen to enable bandwidth management on an interface before you can configure
classes for that interface.
To add a child class, click BW MGMT, then the Class Setup tab. Click the Add Sub-Class
button to open the following screen.
330
DESCRIPTION
Select an interface from the drop-down list box for which you wish to set up classes.
This field displays whether bandwidth management on the interface you selected in
the field above is enabled (Active) or not (Inactive).
Click Add Sub-class to add a sub-class.
Click Edit to configure the selected class. You cannot edit the root class.
Click Delete to delete the class and all its sub-classes. You cannot delete the root
class.
Click Statistics to display the status of the selected class.
Chapter 19 Bandwidth Management