ZyWALL 35 User's Guide
Figure 60 Traffic Redirect
The following table describes the labels in this screen.
Table 49 Traffic Redirect
LABEL
Active
Backup
Gateway IP
Address
Apply
Reset
7.11 Configuring Dial Backup
To change your ZyWALL's Dial Backup settings, click WAN, then the Dial Backup tab. The
screen appears as shown.
158
DESCRIPTION
Select this check box to have the ZyWALL use traffic redirect if the normal WAN
connection goes down.
Type the IP address of your backup gateway in dotted decimal notation. The ZyWALL
automatically forwards traffic to this IP address if the ZyWALL's Internet connection
terminates.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 7 WAN Screens