ZyWALL 35 User's Guide
The following pages show a typical configuration that builds a tunnel between two private
networks. One network is the headquarters (HQ) and the other is a branch office. Both sites
have static (fixed) public addresses. Replace the Secure Gateway Address and Local/
Remote IP Address Start settings with your own values.
VPN Configuration via Web Configurator
This section gives a VPN rule configuration example using the web configurator.
1 Click VPN to display the following screen. Click the Add button.
Figure 398 VPN Rules
2 Configure the screens in the headquarters and the branch office as follows and click
Apply.
The pre-shared key must be exactly the same on both IPSec routers. Use a simple key
and/or copy and paste the setting into the other IPSec router to avoid typos.
630
Appendix K VPN Setup