Figure 81 Rule Summary - ZyXEL Communications ZyWall 35 User Manual

1 Click the FIREWALL link and then the Rule Summary tab. Select WAN to LAN from
the Packet Direction drop-down list box.

Figure 81 Rule Summary

2 In the Rule Summary screen, type the index number for where you want to put the rule.
For example, if you type 6, your new rule becomes number 6 and the previous rule 6 (if
there is one) becomes rule 7.
3 Click Insert to display the firewall rule configuration screen.
4 Select Any in the Destination Address box and then click Delete.
5 Configure the destination address screen as follows and click Add.
Chapter 10 Firewall Screens
ZyWALL 35 User's Guide
197