Smt Menus At A Glance - ZyXEL Communications ZyWall 35 User Manual

Table 148 Main Menu Summary
NO. MENU TITLE
3 LAN Setup
4 Internet Access Setup
5 DMZ Setup
6 Route Setup
11 Remote Node Setup
12 Static Routing Setup
15 NAT Setup
21 Filter and Firewall
Setup
22 SNMP Configuration
23 System Password
24 System Maintenance
25 IP Routing Policy Setup From displaying system status to uploading firmware, this menu
26 Schedule Setup
27 VPN /IPSec Setup
99 Exit

25.3.2 SMT Menus at a Glance

The following figure gives you an example overview of the various SMT menu screens for
your ZyWALL.
Chapter 25 Introducing the SMT
FUNCTION
Use this menu to apply LAN filters, configure LAN DHCP and TCP/IP
settings and configure the wireless LAN port.
Configure your Internet Access setup (Internet address, gateway, login,
etc.) with this menu.
Use this menu to configure your public servers connected to the DMZ
port.
Use this menu to configure your WAN route assessment, traffic redirect
properties and failover parameters.
Use this menu to configure detailed remote node settings (your ISP is
also a remote node) as well as apply WAN filters.
Configure IP static routes in this menu.
Use this menu to configure Network Address Translation.
Configure filters, activate/deactivate the firewall and view the firewall
log.
Use this menu to configure SNMP-related parameters.
Change your password in this menu (recommended).
From displaying system status to uploading firmware, this menu
provides comprehensive system maintenance.
provides comprehensive system maintenance.
Use this menu to schedule outgoing calls.
Use this menu to configure VPN connections.
Use this menu to exit (necessary for remote configuration).
ZyWALL 35 User's Guide
415