Restore Using Ftp Session Example; Restore Via Console Port; Figure 330 Restore Using Ftp Session Example; Figure 331 System Maintenance: Restore Configuration - ZyXEL Communications ZyWall 35 User Manual

39.4.2 Restore Using FTP Session Example

Figure 330 Restore Using FTP Session Example

ftp> put config.rom rom-0
200 Port command okay
150 Opening data connection for STOR rom-0
226 File received OK
221 Goodbye for writing flash
ftp: 16384 bytes sent in 0.06Seconds 273.07Kbytes/sec.
ftp>quit
Refer to the File Maintenance Over WAN section
TFTP and FTP over WAN.

39.4.3 Restore Via Console Port

Restore configuration via console port by following the HyperTerminal procedure shown next.
Procedures using other serial communications programs should be similar.
1 Display menu 24.6 and enter "y" at the following screen.

Figure 331 System Maintenance: Restore Configuration

2 The following screen indicates that the Xmodem download has started.

Figure 332 System Maintenance: Starting Xmodem Download Screen

3 Run the HyperTerminal program by clicking Transfer, then Send File as shown in the
following screen.
Chapter 39 Firmware and Configuration File Maintenance
Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):
Starting XMODEM download (CRC mode) ...CCCCCCCCC
ZyWALL 35 User's Guide
to read about configurations that disallow
527