Rapid Stp; Stp Terminology; How Stp Works; Table 25 Stp Path Costs - ZyXEL Communications ZyWall 35 User Manual

Internet security appliance
Hide thumbs Also See for ZyWall 35:
Table of Contents

Advertisement

ZyWALL 35 User's Guide

5.2.1 Rapid STP

The ZyWALL uses IEEE 802.1w RSTP (Rapid Spanning Tree Protocol) that allow faster
convergence of the spanning tree (while also being backwards compatible with STP-only
aware bridges). Using RSTP topology change information does not have to propagate to the
root bridge and unwanted learned addresses are flushed from the filtering database. In RSTP,
the port states are Discarding, Learning, and Forwarding.

5.2.2 STP Terminology

The root bridge is the base of the spanning tree; it is the bridge with the lowest identifier value
(MAC address).
Path cost is the cost of transmitting a frame from the root bridge to that port. It is assigned
according to the speed of the link to which a port is attached. The slower the media, the higher
the cost - see the next table.

Table 25 STP Path Costs

Path Cost
Path Cost
Path Cost
Path Cost
Path Cost
Path Cost
On each bridge, the root port is the port through which this bridge communicates with the root.
It is the port on this switch with the lowest path cost to the root (the root path cost). If there is
no root port, then this bridge has been accepted as the root bridge of the spanning tree network.
For each LAN segment, a designated bridge is selected. This bridge has the lowest cost to the
root among the bridges connected to the LAN.

5.2.3 How STP Works

After a bridge determines the lowest cost-spanning tree with STP, it enables the root port and
the ports that are the designated ports for connected LANs, and disables all other ports that
participate in STP. Network packets are therefore only forwarded between enabled ports,
eliminating any possible network loops.
STP-aware bridges exchange Bridge Protocol Data Units (BPDUs) periodically. When the
bridged LAN topology changes, a new spanning tree is constructed.
108
RECOMMENDED
LINK SPEED
VALUE
4Mbps
250
10Mbps
100
16Mbps
62
100Mbps
19
1Gbps
4
10Gbps
2
RECOMMENDED
RANGE
100 to 1000
50 to 600
40 to 400
10 to 60
3 to 10
1 to 5
Chapter 5 Bridge Screens
ALLOWED
RANGE
1 to 65535
1 to 65535
1 to 65535
1 to 65535
1 to 65535
1 to 65535

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zywall 70

Table of Contents