System Reports Specifications; Log Descriptions; Table 157 Report Specifications; Table 158 System Maintenance Logs - ZyXEL Communications ZYWALL 2 WG User Manual

Chapter 25 Logs Screens

25.4.4 System Reports Specifications

The following table lists detailed specifications on the reports feature.

Table 157 Report Specifications

LABEL
Number of web
sites/protocols
or ports/IP
addresses
listed:
Hit count limit:
Bytes count
limit:

25.5 Log Descriptions

This section provides descriptions of example log messages.

Table 158 System Maintenance Logs

LOG MESSAGE
Time calibration is
successful
Time calibration failed
WAN interface gets IP: %s
DHCP client IP expired
DHCP server assigns %s
Successful SMT login
SMT login failed
Successful WEB login
WEB login failed
Successful TELNET login
TELNET login failed
Successful FTP login
FTP login failed
NAT Session Table is Full!
Starting Connectivity
Monitor
Time initialized by Daytime
Server
Time initialized by Time
server
434
DESCRIPTION
20
32
Up to 2 hits can be counted per web site. The count starts over at 0 if it passes
four billion.
64
Up to 2 bytes can be counted per protocol/port or LAN IP address. The count
starts over at 0 if it passes 2
DESCRIPTION
The router has adjusted its time based on information from
the time server.
The router failed to get information from the time server.
A WAN interface got a new IP address from the DHCP,
PPPoE, PPTP or dial-up server.
A DHCP client's IP address has expired.
The DHCP server assigned an IP address to a client.
Someone has logged on to the router's SMT interface.
Someone has failed to log on to the router's SMT interface.
Someone has logged on to the router's web configurator
interface.
Someone has failed to log on to the router's web configurator
interface.
Someone has logged on to the router via telnet.
Someone has failed to log on to the router via telnet.
Someone has logged on to the router via FTP.
Someone has failed to log on to the router via FTP.
The maximum number of NAT session table entries has been
exceeded and the table is full.
Starting Connectivity Monitor.
The router got the time and date from the Daytime server.
The router got the time and date from the time server.
64
bytes.
ZyWALL 2WG User's Guide