Configuring Port Forwarding; Figure 147 Port Translation Example - ZyXEL Communications ZyWall 35 User Manual

Figure 147 Port Translation Example

16.6 Configuring Port Forwarding

Click NAT and Port Forwarding to open the Port Forwarding screen.
Refer to Figure 101
Chapter 16 Network Address Translation (NAT)
Note: If you do not assign a Default Server IP address, the
ZyWALL discards all packets received for ports that are not
specified here or in the remote management setup.
for port numbers commonly used for particular services.
Note: The last port forwarding rule is reserved for Roadrunner
services. The rule is activated only when you set the WAN
Encapsulation to Ethernet and the Service Type to
something other than Standard.
ZyWALL 35 User's Guide
305