ZyWALL 35 User's Guide
The following table describes the fields in this menu.
Table 170 Menu 6.1: Route Assessment
FIELD
Probing WAN 1/2
Check Point
Probing Traffic
Redirection Check
Point
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.
31.3 Traffic Redirect
To configure the parameters for traffic redirect, enter 2 in Menu 6 - Route Setup to open
Menu 6.2 - Traffic Redirect as shown next.
Figure 260 Menu 6.2: Traffic Redirect
The following table describes the fields in this menu.
Table 171 Menu 6.2: Traffic Redirect
FIELD
Active
Backup Gateway IP
Address
454
DESCRIPTION
Press [SPACE BAR] and then press [ENTER] to choose Yes to test your
ZyWALL's WAN accessibility.
If you do not select No in the Use Default Gateway as Check Point field and
enter a domain name or IP address of a reliable nearby computer (for example,
your ISP's DNS server address) in the Check Point field, the ZyWALL will use
the default gateway IP address.
Press [SPACE BAR] and then press [ENTER] to choose Yes to test your
ZyWALL's traffic redirect connection.
If you do not select No in the Use Default Gateway as Check Point field and
enter a domain name or IP address of a reliable nearby computer (for example,
your ISP's DNS server address) in the Check Point field, the ZyWALL will use
the default gateway IP address.
Menu 6.2 - Traffic Redirect
Active= No
Configuration:
Backup Gateway IP Address= 0.0.0.0
Metric= 14
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] and select Yes (to enable) or No (to disable) traffic
redirect setup. The default is No.
Enter the IP address of your backup gateway in dotted decimal notation.
The ZyWALL automatically forwards traffic to this IP address if the ZyWALL's
Internet connection terminates.
Chapter 31 Route Setup