Add Or Edit A Directory Server; Figure 140 Directory Server Add; Table 94 Directory Servers - ZyXEL Communications ZyWall 35 User Manual

The following table describes the labels in this screen.

Table 94 Directory Servers

LABEL
PKI Storage Space
in Use
#
Name
Address
Port
Protocol
Modify
Add

15.17 Add or Edit a Directory Server

Click CERTIFICATES, Directory Servers to open the Directory Servers screen. Click
Add (or the details icon) to open the following screen. Use this screen to configure
information about a directory server that the ZyWALL can access.

Figure 140 Directory Server Add

Chapter 15 Certificates
DESCRIPTION
This bar displays the percentage of the ZyWALL's PKI storage space that is
currently in use. When you are using 80% or less of the storage space, the bar is
green. When the amount of space used is over 80%, the bar is red. When the bar
is red, you should consider deleting expired or unnecessary certificates before
adding more certificates.
The index number of the directory server. The servers are listed in alphabetical
order.
This field displays the name used to identify this directory server.
This field displays the IP address or domain name of the directory server.
This field displays the port number that the directory server uses.
This field displays the protocol that the directory server uses.
Click the details icon to open a screen where you can change the information
about the directory server.
Click the delete icon to remove the directory server entry. A window displays
asking you to confirm that you want to delete the directory server. Note that
subsequent certificates move up by one when you take this action.
Click Add to open a screen where you can configure information about a directory
server so that the ZyWALL can access it.
ZyWALL 35 User's Guide
291