Figure 202 Reports; Table 134 Reports - ZyXEL Communications ZyWall 35 User Manual

Internet security appliance

Hide thumbs Also See for ZyWall 35:

Table of Contents

Figure 202 Reports

The following table describes the labels in this screen.

Collect Statistics Select the check box and click Apply to have the ZyWALL record report data.

Traffic Statistics

to Syslog Server

for Analysis

Chapter 23 Logs Screens

Note: Enabling the ZyWALL's reporting function decreases the

overall throughput by about 1 Mbps.

Select the check box and click Apply to have the ZyWALL send unprocessed traffic

statistics to a syslog server for analysis.

You must have the syslog server already configured in the Log Settings screen.

Click Apply to save your changes back to the ZyWALL.

Click Reset to begin configuring this screen afresh.

Select on which interface (LAN or DMZ) the logs will be collected. The logs on the

DMZ or LAN IP alias 1 and 2 are also recorded.

Use the drop-down list box to select the type of reports to display.

Web Site Hits displays the web sites that have been visited the most often from the

LAN and how many times they have been visited.

Protocol/Port displays the protocols or service ports that have been used the most

and the amount of traffic for the most used protocols or service ports.

LAN IP Address displays the LAN IP addresses to and /or from which the most

traffic has been sent and how much traffic has been sent to and from those IP

Click Refresh to update the report display. The report also refreshes automatically

when you close and reopen the screen.

Click Flush to discard the old report data and update the report display.

Note: All of the recorded reports data is erased when you turn

off the ZyWALL.

ZyWALL 35 User's Guide