Configuration File Upload; Ftp File Upload Command From The Dos Prompt Example; Figure 335 Telnet Into Menu 24.7.1: Upload System Firmware; Figure 336 Telnet Into Menu 24.7.2: System Maintenance - ZyXEL Communications ZyWall 35 User Manual

Figure 335 Telnet Into Menu 24.7.1: Upload System Firmware

To upload the system firmware, follow the procedure below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your system. Then type "root" and
SMT password as requested.
3. Type "put firmwarefilename ras" where "firmwarefilename" is the name
of your firmware upgrade file on your workstation and "ras" is the remote
file name on the system.
4. The system reboots automatically after a successful firmware upload.
For details on FTP commands, please consult the documentation of your FTP
client program. For details on uploading system firmware using TFTP (note
that you must remain on this menu to upload system firmware using TFTP),
please see your manual.
Press ENTER to Exit:

39.5.2 Configuration File Upload

You see the following screen when you telnet into menu 24.7.2.

Figure 336 Telnet Into Menu 24.7.2: System Maintenance

Menu 24.7.2 - System Maintenance - Upload System Configuration File
To upload the system configuration file, follow the procedure below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your system. Then type "root" and
SMT password as requested.
3. Type "put configurationfilename rom-0" where "configurationfilename"
is the name of your system configuration file on your workstation, which
will be transferred to the "rom-0" file on the system.
4. The system reboots automatically after the upload system
configuration file process is complete.
For details on FTP commands, please consult the documentation of your FTP
client program. For details on uploading configuration file using TFTP
(note that you must remain on this menu to upload configuration file using
TFTP), please see your manual.
Press ENTER to Exit:
To upload the firmware and the configuration file, follow these examples

39.5.3 FTP File Upload Command from the DOS Prompt Example

1 Launch the FTP client on your computer.
Chapter 39 Firmware and Configuration File Maintenance
Menu 24.7.1 - System Maintenance - Upload System Firmware
ZyWALL 35 User's Guide
529