Command Usage; Figure 343 Valid Commands; Table 197 Valid Commands - ZyXEL Communications ZyWall 35 User Manual

ZyWALL 35 User's Guide
The required fields in a command are enclosed in angle brackets <>.
The optional fields in a command are enclosed in square brackets [].
The |symbol means "or".
For example,
sys filter netbios config <type> <on|off>
means that you must specify the type of netbios filter and whether to turn it on or off.

40.1.2 Command Usage

A list of commands can be found by typing help or ? at the command prompt. Always type
the full command. Type exit to return to the SMT main menu when finished.

Figure 343 Valid Commands

Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys
aux
bm
ras>
The following table describes some commands in this screen.

Table 197 Valid Commands

COMMAND
sys
exit
ether
aux
ip
ipsec
bridge
bm
certificates
8021x
radius
536
ls
ip
certificates
DESCRIPTION
The system commands display device information and configure device settings.
This command returns you to the SMT main menu.
These commands display Ethernet information and configure Ethernet settings.
These commands display dial backup information and control dial backup connections.
These commands display IP information and configure IP settings.
These commands display IPSec information and configure IPSec settings.
These commands display bridge information.
These commands configure bandwidth management settings and display bandwidth
management information.
These commands display certificate information and configure certificate settings.
These commands configure 802.1x settings and display 802.1x information.
These commands display RADIUS information and configure RADIUS settings.
exit ether
ipsec bridge
8021x radius
Chapter 40 System Maintenance Menus 8 to 10