Viewing Lan Ip Address; Figure 204 Protocol/Port Report Example; Table 136 Protocol/ Port Report - ZyXEL Communications ZyWall 35 User Manual

Figure 204 Protocol/Port Report Example

The following table describes the labels in this screen.

Table 136 Protocol/ Port Report

LABEL
Protocol/Port
Direction
Amount

23.4.3 Viewing LAN IP Address

In the Reports screen, select LAN IP Address from the Report Type drop-down list box to
have the ZyWALL record and display the LAN IP addresses that the most traffic has been sent
to and/or from and how much traffic has been sent to and/or from those IP addresses.
Chapter 23 Logs Screens
DESCRIPTION
This column lists the protocols or service ports for which the most traffic has gone
through the ZyWALL. The protocols or service ports are listed in descending order with
the most used protocol or service port listed first.
This field displays Incoming to denote traffic that is coming in from the WAN to the
LAN or DMZ. This field displays Outgoing to denote traffic that is going out from the
LAN or DMZ to the WAN.
This column lists how much traffic has been sent and/or received for each protocol or
service port. The measurement unit shown (bytes, Kbytes, Mbytes or Gbytes) varies
with the amount of traffic for the particular protocol or service port. The count starts
over at 0 if a protocol or port passes the bytes count limit
Note: Computers take turns using dynamically assigned LAN
IP addresses. The ZyWALL continues recording the bytes sent
to or from a LAN IP address when it is assigned to a different
computer.
ZyWALL 35 User's Guide
(see Table 138).
393