The following table describes the labels in this screen.
LABEL
Start Collection/
The button text shows Start Collection when the ZyAIR is not recording report data and
Stop Collection
Stop Collection when the ZyAIR is recording report data.
Click Start Collection to have the ZyAIR record report data.
Click Stop Collection to halt the ZyAIR from recording more data.
Refresh
Click Refresh to update the report display. The report also refreshes automatically when
you close and reopen the screen.
IP Address
This column lists the LAN IP addresses to and/or from which the most traffic has been
sent. The LAN IP addresses are listed in descending order with the LAN IP address to
and/or from which the most traffic was sent listed first.
Direction
This field displays Incoming to denote traffic that is coming in from the WAN to the LAN.
This field displays Outgoing to denote traffic that is going out from the LAN to the WAN.
Amount
This column displays how much traffic has gone to and from the listed LAN IP
addresses. The measurement unit shown (bytes, Kbytes, Mbytes or Gbytes) varies with
the amount of traffic sent to and from the LAN IP address. The count starts over at 0 if
the total traffic sent to and from a LAN IP passes the bytes count limit (see Table 15-6).
15.3.3 Reports Specifications
The following table lists detailed specifications on the reports feature.
LABEL
Number of web sites/protocols or
ports/IP addresses listed:
Hit count limit:
Bytes count limit:
Logs Screens
Table 15-5 LAN IP Address Report
Table 15-6 Report Specifications
20
32
Up to 2
hits can be counted per web site. The count starts over at 0
if it passes four billion.
64
Up to 2
bytes can be counted per protocol/port or LAN IP address.
The count starts over at 0 if it passes 2
ZyAIR Wireless Gateway Series User's Guide
DESCRIPTION
DESCRIPTION
64
bytes.
15-11