Figure 234 Menu 1.1.1: Ddns Edit Host; Table 153 Menu 1.1.1: Ddns Edit Host - ZyXEL Communications ZyWall 35 User Manual

Figure 234 Menu 1.1.1: DDNS Edit Host

The following table describes the fields in this screen.

Table 153 Menu 1.1.1: DDNS Edit Host

FIELD
Host Name
DDNS Type
Enable
Wildcard
Option
Enable Off Line
Option
Bind WAN
HA
Chapter 26 SMT Menu 1 - General Setup
Menu 1.1.1 - DDNS Edit Host
Hostname= ZyWALL
DDNS Type= DynamicDNS
Enable Wildcard Option= Yes
Enable Off Line Option= N/A
Bind WAN= 1
HA= Yes
IP Address Update Policy:
DDNS Server Auto Detect IP Address= Yes
Use Specified IP Address= N/A
Use IP Address= N/A
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Enter your host name in this field.
Press [SPACE BAR] and then [ENTER] to select DynamicDNS if you have a dynamic
IP address(es). Select StaticDNS if you have a static IP address(s).
Select CustomDNS to have dyns.org provide DNS service for a domain name that
you already have from a source other than dyndns.org.
Your ZyWALL supports DYNDNS Wildcard. Press [SPACE BAR] and then [ENTER]
to select Yes or No. This field is N/A when you choose DDNS client as your service
provider.
This field is only available when CustomDNS is selected in the DDNS Type field.
Press [SPACE BAR] and then [ENTER] to select Yes. When Yes is selected,
www.dyndns.org/
traffic is redirected to a URL that you have previously specified
(see www.dyndns.org for details).
Enter the WAN port to use for updating the IP address of the domain name.
Press [SPACE BAR] and then [ENTER] to select Yes to enable the high availability
(HA) feature.
If the WAN port specified in the Bind WAN field does not have a connection, the
ZyWALL will attempt to use the IP address of another WAN port to update the domain
name.
When the WAN ports are in the active/passive operating mode, the ZyWALL will
update the domain name with the IP address of whichever WAN port has a
connection, regardless of the setting in the Bind WAN field.
Clear this check box and the ZyWALL will not update the domain name with an IP
address if the WAN port specified in the Bind WAN field does not have a connection.
Note: If you enable high availability, DDNS can also function when the
ZyWALL uses the dial backup port. DDNS does not function when the
ZyWALL uses traffic redirect.
Refer to the High Availability section
ZyWALL 35 User's Guide
in Chapter 20 DNS for detailed information.
http://
423