ZyWALL 35 User's Guide
Figure 276 Menu 15.1.1: First Set
Set Name= NAT_SET
Idx
Local Start IP
---
---------------
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
34.2.1.3 Ordering Your Rules
Ordering your rules is important because the ZyWALL applies the rules in the order that you
specify. When a rule matches the current packet, the ZyWALL takes the corresponding action
and the remaining rules are ignored. If there are any empty rules before your new configured
rule, your configured rule will be pushed up by that number of empty rules. For example, if
you have already configured rules 1 to 6 in your current set and now you configure rule
number 9. In the set summary screen, the new rule will be rule 7, not 9.
Now if you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so as old rule 5 becomes rule
4, old rule 6 becomes rule 5 and old rule 7 becomes rule 6.
Table 180 Fields in Menu 15.1.1
FIELD
Set Name Enter a name for this set of rules. This is a required field. If this field is left blank, the entire
Action
Select
Rule
474
Menu 15.1.1 - Address Mapping Rules
Local End IP
-------------
Action= None
Press ENTER to Confirm or ESC to Cancel:
Note: The Type, Local and Global Start/End IPs are configured
in menu 15.1.1.1 (described later) and the values are displayed
here.
DESCRIPTION
set will be deleted.
The default is Edit. Edit means you want to edit a selected rule (see following field). Insert
Before means to insert a rule before the rule selected. The rules after the selected rule will
then be moved down by one rule. Delete means to delete the selected rule and then all the
rules after the selected one will be advanced one rule. None disables the Select Rule
item.
When you choose Edit, Insert Before or Delete in the previous field the cursor jumps to
this field to allow you to select the rule to apply the action in question.
Global Start IP
---------------
Select Rule= N/A
Chapter 34 Network Address Translation (NAT)
Global End IP
Type
-------------
----