Configuring Lan Dns; Figure 172 Lan Dns - ZyXEL Communications ZyWall 35 User Manual

Table 118 Cache
LABEL
Reset
DNS Cache Entry
Flush
Refresh
#
Cache Type
Domain Name
IP Address
Remaining Time
(sec)
Modify

20.9 Configuring LAN DNS

Click DNS and then the LAN tab to open the LAN DNS screen shown next. Use this screen to
configure the DNS server information that the ZyWALL sends to its LAN DHCP clients.

Figure 172 LAN DNS

Chapter 20 DNS
DESCRIPTION
Click Reset to begin configuring this screen afresh.
Click this button to clear the cache manually. After you flush the cache, the
ZyWALL must query the DNS servers again for any domain names that had
been previously resolved.
Click this button to reload the cache.
This is the index number of a record.
This displays whether the response for the DNS request is positive or negative.
This is the domain name of a host.
This is the (resolved) IP address of a host. This field displays 0.0.0.0 for
negative DNS resolution entries.
This is the number of seconds left before the DNS resolution entry is discarded
from the cache.
Click the delete icon to remove the DNS resolution entry from the cache.
ZyWALL 35 User's Guide
345