Figure 357 Schedule Set Setup; Table 206 Schedule Set Setup - ZyXEL Communications ZyWall 35 User Manual

ZyWALL 35 User's Guide
To set up a schedule set, select the schedule set you want to setup from menu 26 (1-12) and
press [ENTER] to see Menu 26.1 - Schedule Set Setup as shown next.

Figure 357 Schedule Set Setup

If a connection has been already established, your ZyWALL will not drop it. Once the
connection is dropped manually or it times out, then that remote node can't be triggered up
until the end of the Duration.

Table 206 Schedule Set Setup

FIELD
Active
Start Date
How Often
Once:
Date
Weekdays:
Day
Start Time
Duration
556
Menu 26.1 - Schedule Set Setup
Active= Yes
How Often= Once
Start Date(yyyy-mm-dd)= N/A
Once:
Date(yyyy-mm-dd)= 2000 - 01 - 01
Weekdays:
Sunday= N/A
Monday= N/A
Tuesday= N/A
Wednesday= N/A
Thursday= N/A
Friday= N/A
Saturday= N/A
Start Time(hh:mm)= 00 : 00
Duration(hh:mm)= 00 : 00
Action= Forced On
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle
DESCRIPTION
Press [SPACE BAR] to select Yes or No. Choose Yes and press [ENTER] to activate
the schedule set.
Enter the start date when you wish the set to take effect in year -month-date format.
Valid dates are from the present to 2036-12-31.
Should this schedule set recur weekly or be used just once only? Press [SPACE BAR]
and then [ENTER] to select Once or Weekly. Both these options are mutually exclusive.
If Once is selected, then all weekday settings are N/A. When Once is selected, the
schedule rule deletes automatically after the scheduled time elapses.
If you selected Once in the How Often field above, then enter the date the set should
activate here in year-month-date format.
If you selected Weekly in the How Often field above, then select the day(s) when the
set should activate (and recur) by going to that day(s) and pressing [SPACE BAR] to
select Yes, then press [ENTER].
Enter the start time when you wish the schedule set to take effect in hour-minute format.
The duration determines how long the ZyWALL is to apply the action configured in the
Action field. Enter the maximum length of time in hour-minute format.
Chapter 43 Call Scheduling