ZyWALL 35 User's Guide
Figure 333 Restore Configuration Example
Type the configuration file's location, or click Browse to search for it.
Choose the Xmodem protocol.
Then click Send.
4 After a successful restoration you will see the following screen. Press any key to restart
the ZyWALL and return to the SMT menu.
Figure 334 Successful Restoration Confirmation Screen
39.5 Uploading Firmware and Configuration Files
This section shows you how to upload firmware and configuration files. You can upload
configuration files by following the procedure in
following the instructions in Menu 24.7.2 - System Maintenance - Upload System
Configuration File (for console port).
39.5.1 Firmware File Upload
FTP is the preferred method for uploading the firmware and configuration. To use this feature,
your computer must have an FTP client.
When you telnet into the ZyWALL, you will see the following screens for uploading firmware
and the configuration file using FTP.
528
Save to ROM
Hit any key to start system reboot.
Note: WARNING!
Do not interrupt the file transfer process as this may
PERMANENTLY DAMAGE YOUR ZyWALL.
Chapter 39 Firmware and Configuration File Maintenance
the Restore Configuration section
or by