Weighted Round Robin; Figure 52 Load Balancing: Least Load First; Table 43 Load Balancing: Least Load First - ZyXEL Communications ZyWall 35 User Manual

Internet security appliance

Hide thumbs Also See for ZyWall 35:

Table of Contents

The following table describes the related fields in this screen.

Active/Active

Load Balancing

Load Balancing

Interface This field displays the name of the WAN interface (WAN1 and WAN2).

7.7.2 Weighted Round Robin

To load balance using the weighted round robin method, select Weighted Round Robin in the

Load Balancing Algorithm field.

Chapter 7 WAN Screens

Select Active/Active Mode and set the related fields to enable load balancing on the

Select a load balancing method to use from the drop-down list box.

You can set the ZyWALL to get the measured bandwidth using the average

bandwidth in the specified time interval.

Enter the time interval between 10 and 600 seconds.

Specify the direction of the traffic utilization you want the ZyWALL to use in

calculating the load balancing index.

Select Outbound Only, Inbound Only or Outbound + Inbound.

This field is applicable when you select Outbound + Inbound or Inbound Only in

the Load Balancing Index(es) field.

Specify the inbound (or downstream) bandwidth (in kilo bites per second) for the

This field is applicable when you select Outbound + Inbound or Outbound Only in

the Load Balancing Index(es) field.

Specify the outbound (or upstream) bandwidth (in kilo bites per second) for the

ZyWALL 35 User's Guide