Table of Contents
Advertisement
NTI Secure Remote Power Reboot Switch
Enterprise Configuration
The Enterprise Configuration page is used to enter basic company information to be applied to the body of alerts. To view the
Enterprise Configuration, click on Enterprise from the Administration section of the menu. Enter in the blocks your unit name,
location, the contact person that alert e-mails should refer to, the phone number to reach that person, and the e-mail address
assigned to the IPDU-Sx.
Alert message sent via email, syslog and SNMP will include the information in these blocks.
The IPDU-S4 and IPDU-S8 additionally has a section for the GSM modem status. A GSM modem must be installed in order to
send SMS messages. If a GSM modem is properly installed (page 8), the type, status, IMEI number, and signal strength will be
displayed. The modem will work with a signal strength between -111dBm (weak) and -51dBm (strong). If a modem is not
installed, the words "not available" will be displayed instead for the modem type.
Note: It may take several minutes for the GSM modem to be detected by the IPDU-Sx.
GSM modem is properly installed
Figure 35- Enterprise Configuration
32
Advertisement
Table of Contents
