Table of Contents
Advertisement
NTI Secure Remote Power Reboot Switch
The Date and Time of the IPDU-Sx can be either manually setup to use an onboard clock or set to be synchronized with an NTP
server.
The configuration of the IPDU-Sx can also be easily backed up to a file on your PC and restored from that file as
needed.
Time Settings
Time Zone
Enable Daylight Saving
Set Date
Set Time
Enable NTP
NTP server
NTP Frequency
Configuration Backup &
Restore
Choose file
Download Configuration File
Restore Defaults
Note: If "Restore Defaults" is used, the IP address will also be restored to its default address of 192.168.1.22 with a login
name "root" and password "nti".
contact NTI for assistance.
To identify the IP address of the IPDU-Sx without restoring defaults, use the Discovery Tool (page 13).
Click on Save when finished with Time Setting changes.
Description
Enter the appropriate time zone
Apply a checkmark to have the time change according to Daylight Saving Time rules
Enter the system date in MM-DD-YYYY format
Enter the system time of day in hh:mm:ss format
Place a checkmark to enable the IPDU-Sx to automatically sync up with a time server via NTP
If the NTP is enabled, enter the IP address of the NTP server
Enter the frequency (in minutes) for the IPDU-Sx to query the NTP server (minimum is 5
minutes)
Browse for a saved configuration file to be restored to the IPDU-Sx. After selection, press the "
"Save" button and the IPDU-Sx will restore the configuration settings and reboot. Allow 1
minute before trying to reconnect and log in again.
Note: The IP address will be set to the IP address in the file and may be different
Click this button to save the configuration of the IPDU-Sx to a location on your PC. This file
can be restored using the "Choose file" field in the event you wish to return the IPDU-Sx to a
former state
Click this button to restore the IPDU-Sx to the configuration settings it had upon receipt from the
factory.
Be careful! This will erase all user configuration settings. Upon restoration, the
IPDU-Sx will reboot. Allow 1 minute before trying to reconnect and log in again.
Confirmation is required.
To restore the root password to "nti" without having to restore all default settings,
31
Advertisement
Table of Contents
