Table of Contents
Advertisement
NTI Secure Remote Power Reboot Switch
Account Settings
Enabled
Admin
Title
Department
Company
More about User Privileges
The root user (or any user with administrator rights) can change the root password and configure how the root user will receive
alert messages. Users with administrative rights can change all configuration settings except for the root user name.
User Contact Settings
Select "Contact Settings" from the list and press <Enter>. A menu with the contact settings for that specific user will open.
Contact Settings
Group 1
Group 2
Enable Email
Email address
Syslog alerts
SNMP traps
Syslog/SNMP IP address
Press <Tab> to highlight Save and press <Enter> to save before pressing <Esc> to exit.
Description
Change to "Yes" to enable this user to access the IPDU-Sx
Change to "Yes" if this user should have administrative privileges
Enter information as applicable (optional)
Enter information as applicable (optional)
Enter information as applicable (optional)
Figure 115- Text Menu-User Contact Settings
Change to "Yes" if the user should receive messages from sensors, IP devices and outlets in
Group 1
Change to "Yes" if the user should receive messages from sensors, IP devices and outlets in
Group 2
Change to "Yes" if the user should receive messages via email
Enter a valid email address if the user should receive email alert messages
Change to "Yes" if the user should receive alerts via syslog messages
Change to "Yes" if the user should receive alerts via SNMP traps
Enter a valid syslog/SNMP IP address for the user to receive syslog/SNMP messages
92
Advertisement
Table of Contents
