Figure 39- Setup Snmp To Control Output Relays - Network Technologies IPDU-Sx Installation And Operation Manual

NTI Secure Remote Power Reboot Switch

Figure 39- Setup SNMP to control output relays

Note: enter same values from IPDU to the MIB browser
(public)
3. Expand the tree to view the
relay output values (right click
-> Get Subtree)
5. Change "Value" to 1 (for On)
or 0 (for Off). Click "OK".
1. Configure the IPDU (Network Settings)
(private)
2. Configure the MIB browser
4. Identify which Output to
change state (power On or
power Off), right click and
choose Set
37
6. Confirmation of state
change.