Table of Contents
Advertisement
NTI Secure Remote Power Reboot Switch
User Authentication
Mode
Primary LDAP Server
Secondary LDAP Server
LDAP Server Type
LDAP Service Base
Even though LDAP authentication is being used, each user must also have a local account. User permission level is established
by the local account.
Press <Tab> to highlight Save and press <Enter> to save before pressing <Esc> to exit.
IP Filtering
Included in the Security Configuration options is IP Filtering. IP Filtering provides an additional mechanism for securing the
IPDU-Sx. Access to the IPDU-Sx network services (SNMP, HTTP(S), SSH, Telnet) can be controlled by allowing or disallowing
connections from various IP addresses, subnets, or networks.
Up to 16 IP Filtering rules can be defined to protect the IPDU-Sx from unwanted access from intruders. Each rule can be set as
Enabled or Disabled. Rules can be set to explicitly drop attempts to connect, or to accept them.
Select Local to use authentication based on passwords in the IPDU-Sx user configuration
Select LDAP to use authentication based on passwords in an LDAP server
Enter Hostname or IP address of Primary LDAP Server
Enter Hostname or IP address of Secondary LDAP Server (optional)
Tab to choose from the following:
Generic LDAP server
Novell Directory server
Microsoft Active Directory
Enter the Base DN for users (ex: ou=People,dc=mycompany,dc=com)
Figure 119- Text Menu-IP Filtering
95
Advertisement
Table of Contents
