Front Panel Leds Indicate Status; Figure 5- Leds On Front Of Ipdu-S2; Figure 6- Leds On Front Of Ipdu-S4/S8 - Network Technologies IPDU-Sx Installation And Operation Manual

NTI Secure Remote Power Reboot Switch

Front Panel LEDs Indicate Status

With proper connections made, the IPDU-Sx is now ready to use. With the power cord attached and plugged into an AC outlet,
the "Power" , "Outlet 1" and "Outlet 2" green LEDs should be illuminated on the front of the IPDU-S2.
the function of each LED.
The IPDU-S4 and IPDU-S8 have a green LED adjacent to each outlet that will illuminate when power is ON to the outlet. (See
page 4.)
LED
Power-green
Outlet 1 and 2-red
Outlet 1 and 2-green
Sensor Fault-red
IP Fault- red
Trip - red
Total Outlet Current
Sensor
Fault
Power
Reset
IP Trip
Fault
Power

Figure 5- LEDs on front of IPDU-S2

Description
Indicates the power status of the IPDU-Sx
Illuminates when the AC OUT (1 or 2) is powered OFF
Illuminates when the AC OUT (1 or 2) is powered ON
Illuminates if the connected sensors are outside of their thresholds
Illuminates if there is an IP monitoring fault
Illuminates if the breaker on the IPDU-S4/8 trips
Displays total current draw of all outlets (IPDU-S4/ -S8 only)
RJ45 Sensors

Figure 6- LEDs on front of IPDU-S4/S8

Outlet Sensor
1 2 Fault
IP
Fault
NTI
R
Network Technologies Inc
Total Outlet
Current
7
The table below describes