NTI Secure Remote Power Reboot Switch
Figure 38- IP Aliases
IP Aliases
Only applicable to IPDU-S4/S8- Firmware version 1.4 or later
Up to 3 IP aliases can be configured. This provides added flexibility when access from multiple networks is required.
To use an alias, be sure to change the default Mode to "Enable".
Then enter a valid IP address, Subnet Mask and Gateway for
the network that will have access to the ENVIROMUX.
Only the primary IP Settings can be assigned by a DHCP server and only the primary settings can have DNS Server settings.
Only the primary IP settings are used for any outgoing connections like alert emails, syslog etc.
36