Figure 134- Text Menu-User Contact Settings - Network Technologies IPDU-Sx Installation And Operation Manual

NTI Secure Remote Power Reboot Switch
Contact Settings
Under Contact Settings, the non-administrative user can decide which sensor group messages they will receive and how.
Contact Settings
Group 1
Group 2
Enable Email
Email address
Syslog alerts
SNMP traps
Syslog/SNMP IP address
Press <Tab> to highlight Save and press <Enter> to save before pressing <Esc> to exit.

Figure 134- Text Menu-User Contact Settings

Change to "Yes" to receive messages from sensors, IP devices and outlets in Group 1
Change to "Yes" to receive messages from sensors, IP devices and outlets in Group 2
Change to "Yes" to receive messages via email
Enter a valid email address to receive email alert messages
Change to "Yes" to receive alerts via syslog messages
Change to "Yes" to receive alerts via SNMP traps
Enter a valid syslog/SNMP IP address to receive syslog/SNMP messages
105