Table of Contents
Advertisement
NTI Secure Remote Power Reboot Switch
View Line Monitor Parameters
The View Line Monitor Parameters selection (IPDU-S4 and IPDU-S8 only) will show the present status of each characteristic of
the power being provided by the IPDU-Sx to the outlets. In the image below, not only is the power through the master being
monitored, but the power through each slave. If the parameter is in alert status, pressing the <Enter> key would provide the
option to either acknowledge the alert or dismiss it.
Figure 71- Text Menu- Line Monitor Parameters
View IP Devices
The View Sensors selection will show the present status of each IP Device monitored by the IPDU-Sx.
The current value being reported by the IP Device and the state (whether Normal or Alert) will be shown. If the IP Device is in
alert status, pressing the <Enter> key would provide the option to either acknowledge the alert or dismiss it.
Figure 72- Text Menu-View IP Devices
63
Advertisement
Table of Contents
