Table of Contents
Advertisement
NTI Secure Remote Power Reboot Switch
More about Operation Modes
In Manual Mode, the outlet will only power cycle when it is performed through the Power Outlet Status page (web interface) or
through the text menu.
In Periodic Mode, the outlet will power cycle based on the settings configured as described in the table above.
In Associated Mode, the outlet can be controlled based on the alert status of a sensor or IP address. When configured to do so
(page 24), the outlet can be powered ON or OFF when a sensor is in alert mode, and/or when it returns to normal state, or power
cycled when an IP Device is in alert mode.
Note: An outlet configured for Associated or Periodic operating mode can be manually powered ON/OFF. If "Manual
Override Mode is selected, manually changing the ON/OFF state of an outlet configured for Associated Mode or Periodic
Mode will change the operating mode to Manual Mode until the outlet is reconfigured.
Configure Sensors
The Configure Sensors menu lists the sensors connected to the IPDU-Sx. Press <Enter> to open the configuration menu for
the selected sensor.
Figure 78- Text Menu-Configure Sensors list
67
Advertisement
Table of Contents
