Table of Contents
Advertisement
NTI Secure Remote Power Reboot Switch
View Data Log
The Data Log provides the administrative user with a listing of all the readings taken by the IPDU-Sx pertaining to the sensors and
IP Devices being monitored. The event log will record the date and time of each reading.
From the Data Log page the administrative user can view the logs, select specific logs to be deleted or press Clear Log to delete
them all.
The number of entries per page can be changed for the user's reading preference. Navigating between pages is as
easy as clicking Previous or Next buttons, or jumping to a specific page if you know where the log entry you are interested in is
listed.
To clear only specific log entries, place a checkmark in each line item to be deleted, and press Delete Selected. Before deleting,
the user may want to save the log for future reference and to make space for more logs by downloading the event log to a file on a
PC. Press Download Data Log to save the log file before clearing it.
Log Settings
The Log Settings page (Figure 59) provides settings for how the IPDU-Sx will react when its Data and Event logs reach capacity.
Each log can be assigned to a group and any user that receives messages from that group can be notified when capacity is being
reached.
The log can be set to either :
The Data and/or Event log can be set to sent alerts to users via email, syslog, and/or SNMP traps once it has reached 90% of
capacity, allowing them time to react.
Figure 58- Data Log page
•
Discontinue- stop logging information
•
Clear and restart- delete all log entries and restart with new entries
•
Wrap- continue logging but delete the oldest entries and new ones are recorded
54
Advertisement
Table of Contents
