NTI Secure Remote Power Reboot Switch
Rack Mounting Instructions
The IPDU-S4R and IPDU-S8 were designed to be mounted in a rack. They include a rack mount kit to make attachment easy.
1.
Attach the ears to the IPDU-Sx using the #6-32x3/16" flat Phillips-head screws (6) provided as shown in the illustration
below.
2.
The holes in the ears should line up with pre-threaded holes in the sides of the IPDU-Sx.
securely.
3.
Install 4 cage nuts to the rack in locations that line up with the holes in the mounting ears on the IPDU-Sx.
4.
Secure the IPDU-Sx to the rack using four #10-32x3/4" screws and cage nuts (provided). Be sure to tighten all mounting
screws securely.
5.
Attach all cables securely to the IPDU-Sx and where necessary supply adequate means of strain relief for
cables
Figure 9- Secure rack mount ears to IPDU-Sx
Figure 10- Secure IPDU-Sx to rack
9
Tighten the screws