Table of Contents
Advertisement
NTI Secure Remote Power Reboot Switch
View Power Outlets
The View Power Outlets selection will show the present status of the Power Outlets on the IPDU-Sx. The current operation mode
of the outlet is shown, as well as its ON/OFF state. To change its state, select the outlet and press <Enter>. Use the <Tab> or
<Arrow> keys to move between Cancel, Turn ON, Turn OFF, or Cycle to power cycle the IPDU-Sx. If Cycle is selected, the
IPDU-Sx will power cycle the outlet based on the configuration settings found under Power Outlet Configuration.
View Sensors
The View Sensors selection will show the present status of each sensor connected to the IPDU-Sx.
The current value being reported by the sensor and the state (whether Normal or Alert) will be shown. If the sensor is in alert
status, pressing the <Enter> key would provide the option to either acknowledge the alert or dismiss it.
Figure 69- Text Menu-Power Outlet Status
Figure 70- Text Menu-Sensor Status
62
Advertisement
Table of Contents
