Setting The Screen Backlight Timer; Configuring The Phone Screen Saver - Cisco SPA 525G2 User Manual

Setting the screen backlight timer

You can set a timer for your screen so that your LCD screen becomes dark after a specified time when the
phone is idle:
1. Press the 'Setup' button.
2. Scroll to 'User Preferences' and press 'Select'.
3. Scroll to 'Screen Preferences' and press 'Select'.
4. Scroll to 'Backlight'. Press the 'Right Arrow' key to choose 'On', which means that the darkening
feature is enabled.
5. Scroll to 'Backlight Timer'. Enter the number of seconds before the display should shut off after the
phone is idle.
6. Press 'Set'.

Configuring the phone screen saver

You can enable your phone's screen saver and specify its appearance and the amount of time for the
phone to be idle before it begins.
To configure your screen saver:
1. Press the 'Setup' button.
2. Scroll to 'User Preferences' and press 'Select'.
3. Scroll to 'Screen Preferences' and press 'Select'.
4. With 'Screen Saver' highlighted, press the 'Right Arrow' key to choose 'On'.
5. Scroll to 'Screen Saver Settings' and press the 'Right Arrow' key to choose the settings:
o Screen Saver Type, choose from:
Black Background – Displays a black screen.
Gray Background – Displays a gray screen.
Black/Gray Rotation – The screen incrementally cycles from black to gray.
Picture Rotation – The screen rotates through available pictures that your phone
administrator has made available on the phone.
Digital Frame – Shows the background picture.
o Trigger Interval – Enter the number of seconds that the phone remains idle before the
screen saver turns on.
o Refresh Interval – Enter the number of seconds before the screen saver should refresh (if,
for example, you chose a rotation of pictures).
6. Press 'Set'.
Version 1.5 42 of 47