Add Call Park To A Programmable Line Key; Configuring Programmable Softkeys - Cisco 6800 Series Administration Manual

Add Call Park to a Programmable Line Key

Procedure
Step 1
Select Voice > Regional.
Step 2 Enter *68 in the Call Park Code field.
Step 3
Enter *88 in the Call Unpark Code field.
Step 4 Click Submit All Changes.
Add Call Park to a Programmable Line Key
You can add call park to a line key to enable the user to temporarily store and retrieve calls. Call park is
supported on private lines and shared lines.
Before you begin
Access the phone administration web page. See
Procedure
Step 1 Select Voice > Phone.
Step 2
Select a line key.
Step 3 Select Disabled to disable the extension.
Step 4
In the Extended Function field, enter a string in this format:
For a private line, enter fnc=prk;sub=$USER@$PROXY;nme=CallPark-Slot1.
For a shared line, enter fnc=prk;sub=$USER@$PROXY;nme=Call-Park1;orbit=<DN of
primary line>.
where:
• fnc= prk means function=call park
• sub= 999999 is the phone to which the call parks. Replace 999999 with a numbers.
• nme= XXXX is the name displayed on the phone for the call park line key. Replace XXXX with a name.
Step 5
Click Submit All Changes.

Configuring Programmable Softkeys

You can customize the softkeys displayed on the phone. The default softkeys (when the phone is in an idle
state) are Redial, Directory, Call Forward, and Do Not Disturb. Other softkeys are available during specific
call states (for example, if a call is on hold, the Resume softkey displays).
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
168
Access the Phone Web Page, on page
Phone Administration
92.