Configuring Date And Time Parameters On Your Phone - Cisco SPA 303g User Manual

Configuring Date and Time Parameters on Your Phone

Setting Your Phone's Date and Time
The date and time for your phone normally come from the SIP proxy server or NTP server.
However, if you need to change some date and time parameters, you can follow these steps:
STEP 1 Press the Setup button.
STEP 2 Scroll to Time/Date and press the select softkey.
STEP 3 Enter the date in the following format: mm*dd*yy (this will display as m/d).
STEP 4 Enter the time in the following format: hh*mm*ss (this will display as (h:mm).
STEP 5 If the time does not display a.m. (a) or p.m. (p) correctly, adjust with Offset. To
change from a.m. to p.m., enter *12*00*00, to change from p.m. to a.m., enter
#12*00*00.
STEP 6 Press the save softkey.
You can set just one of these choices, if necessary.
68