Configuring Voice User Parameters - Cisco SPA 525g User Manual

Configuring Voice User Parameters

You can configure user parameters in the Voice User window, Including call forwarding, do not
disturb, and call waiting.
Configuring Call Forwarding
You can forward calls to another number or to voice mail based on several scenarios. Entering a
value in the CFWD All Dest field creates a default number; calls are forwarded to this number
unless a value is entered in another field. For example, if CFW Busy Dest is blank, the caller is
forwarded to the number entered in this field. If CFW Busy Dest contains a value, if the number is
busy, the caller is forwarded to CFW Busy Dest. If there is no answer and the CFW No Ans Dest
contains a value, calls are forwarded to that number.
To forward calls to another number or to voice mail:
STEP 1 Log in to the phone web user interface.
STEP 2 In the Voice tab User menu, under Call Forward you can configure the following
parameters:
• CFWD Setting—Select yes to enable call forwarding. Select no to disable call forwarding.
• CFWD All Dest—Enter the number to where all calls are forwarded or enter vm to forward
the calls to voice mail.
• CFWD Busy Dest—Enter the number to which to forward calls or enter vm to forward the
calls to voice mail when your number is busy.
• CFWD No Ans Dest—Enter the number to which to forward calls or enter vm to forward the
calls to voice mail when there is no answer at your phone.
• CFWD No Ans Delay—Enter the number of seconds to delay forwarding calls when there is no
answer at your phone.
STEP 3 Click Submit All Changes. Your phone reboots.
94