Load Settings From Local Hard Drive; Save Settings And Reboot The System; Restore To Factory Default Settings - D-Link DSL-2540T User Manual

DSL-2540T ADSL Router User Guide

Load Settings From Local Hard Drive

To load a previously saved configuration file, click the Browse button and locate the file on your computer. Click the
Load button to Load Settings From Local Hard Drive. Confirm that you want to load the file when prompted and the
process is completed automatically. The Router will reboot and begin operating with the configuration settings that have
just been loaded.

Save Settings and Reboot the System

To save and reboot the Router, click the Save and Reboot button under Save Settings and Reboot the System. You will
be prompted to confirm your decision.

Restore To Factory Default Settings

To reset the Router to its factory default settings, click the Restore button. You will be prompted to confirm your
decision to reset the Router. The Router will reboot with the factory default settings including IP settings (192.168.1.1)
and Administrator password (admin).
85