Reset Setting; System Reboot - D-Link DES-2108 User Manual

8-port 10/100 fast ethernet switch

Hide thumbs Also See for DES-2108:

Table of Contents

Note: when restoring a recorded file, the current password will not

be erased.

Reset Setting

The Factory Reset button helps you to reset the device back to the

default setting from the factory. Be aware that the entire configuration

will be reset, the IP address of the device will be get from DHCP

server (factory default is DHCP enabled) or got the default IP address

of 192.168.0.1 when fail to get the IP address from DHCP server.

Figure 47. Reset Setting

Press "System Reboot" button to warm start the Switch

Figure 48. System Reboot

Table of Contents