Installation Of N8117-01A Rs-232C Connector Kit - NEC Express5800 User Manual

Installation of N8117-01A RS-232C Connector Kit

The shipping carton contains the following components.
Item No. Name
1 RS-232C Connector Kit
Handling Guide
2 RS-232C cable (A)
3 RS-232C cable (B)
4 PCI bracket (1)
5 PCI bracket (2)
4
Use Item No. 3 (RS-232C cable (B)) and No. 5 (PCI bracket (2)).
Install N8117-01A in the following procedure.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Remove the side cover.
3.
Assemble the RS232C cable (B) with the PCI bracket (2).
NOTE:
RS-232C Connector Kit. Use "RS232C cable (B)" for the server.
4.
Remove the additional slot cover at the same location (height) as the installation slot.
5.
Open the PCI board retention spring, then remove the additional slot cover.
IMPORTANT: Save the removed slot cover carefully.
Specification No.
856-125671-002
804-063264-020
804-062746-820
243-112122-001
243-112122-002
2
Two types of connectors are provided with N8117-01A
Upgrading Your Server 9-43
Q'ty Remarks
1
1
1
1 Attached to the cable
1 For Full Height PCI board
3
5