NEC Express5800 User Manual page 312

9-22 Upgrading Your Server
IMPORTANT:
Be careful not to make the hard disk drive cage hit on any
components on the mother board.
When inserting the cage, be careful not to have the hard disk drive
damage the cables.
9.
Secure the hard disk drive cage with the four screws removed in step 5.
10.
Connect the interface cable and power cable to the hard disk drive. Connect cables
removed in Step 4.
NOTE:
for odd-numbered ports when using the SATA hard disk drive.
11.
Assemble the server.
12.
Run BIOS SETUP utility and check to see that the hard disk drive is correctly recognized.
See Chapter 4 for details.
Use the red cables for even-numbered ports, and blue cables