Turning On The Server - NEC Express5800 User Manual

3-10 Setting Up Your Server

TURNING ON THE SERVER

Turn on the server and follow the on-screen instructions for setup.
1.
Make sure all external devices, such as a video display, keyboard, and mouse have been
connected, and the power cords are connected.
2.
Power on the video display and any other external devices.
3.
Make sure that the floppy disk drive contains no floppy disk and the optical disk drive
contains no bootable DVD/CD-ROM.
4.
Press the POWER/SLEEP switch.
NOTES:
If the power cord is connected to the power control unit such as the
UPS, turn on the power control unit.
Connect the power cord and wait a few seconds before pressing the
POWER/SLEEP switch. The POWER/SLEEP switch does not work
in a few seconds after connecting the power cord due to firmware
start-up.
POWER/SLEEP switch
POWER/SLEEP lamp